home | product range | safety data | technical data | contact us  

SAFETY DATA SHEET
Click here print this page

 

1.       IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY

 

PRODUCT NAME

Wudcare Heavy Duty Spray Adhesive

 

PART NUMBER

WHDA500

 

SUPPLIER

Care Products & Services Ltd

61 Mill Street

Cannock

Staffs

WS11 0DR

 

TELEPHONE 01543 573374

EMERGENCY pm 01543 278105

FAX 01543 579435

 

  1. COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME DICHLOROMETHANE
CAS No 75-09-2 
CONTENTS 45%
HEALTH RISK (class) (R No) < Xn 40

INGREDIENT NAME BUTANONE
CAS No  78-93-3
CONTENTS <5%
HEALTH RISK Xi 36/37

INGREDIENT NAME LIQUEFIED PETROLEUM
CAS No  68476-85-7
CONTENTS <45%
HEALTH RISK

COMPOSITION COMMENTS 
Synthetic rubber and resin preparation in a chlorinated and ketonic hydrocarbon solvent blend. Aerosol propelled by liquefied petroleum gas

 

  1. HAZARDS IDENTIFICATION


Extremely flammable

Possible risk of irreversible effects

 

  1. FIRST AID MEASURES

 

EYES Rinse the eye with water immediately.  Get medical attention immediately.  Continue to rinse.

SKIN Wash the skin immediately with soap and water.  Get medical attention if irritation persists after washing.

INHALATION Move the exposed person to fresh air at once.  Keep the affected person warm and at rest.  Get prompt medical attention.

INGESTION DO NOT INDUCE VOMITING!  Immediately rinse mouth and provide fresh air.  Get medical attention immediately.

 

  1. FIRE FIGHTING MEASURES

 

EXTINGUISHING MEDIA

This product is not classified as flammable under current       regulations, but does contain flammable materials, which may increase a

fire risk.  Fire can be extinguished using powder, foam or CO2.

 

SPECIAL FIRE FIGHTING PROCEDURES

Breathing apparatus should be worn if exposure to fumes is likely.

 

UNUSUAL & EXPLOSION HAZARDS
Possible risk of a can rupture, when exposed to fire/high temperatures.  Contents of aerosol will add to fuelling of fire.  Solvent vapours may form explosive mixtures with air.

 

HAZARDOUS DECOMPOSITION PRODUCTS

Fire or high temperatures create toxic gases/vapours/fumes of alogenated hydrocarbons, oxides of carbon.

 

  1. ACCIDENTAL RELEASE MEASURES

 

 

SPILL CLEANUP METHODS

Absorb material from ruptured or leaking containers on to an inert material.  Transfer to suitable container for subsequent disposal.

 

  1. HANDLING AND STORAGE

 

USAGE PRECAUTIONS

CAUTION  - Pressurised container.  Do not expose to temperatures exceeding 50oC.  Do not puncture or incinerate even when empty.  Do not spray on to naked flame or any incandescent material.  The use of a suitable barrier cream is recommended, but not as a substitute for gloves.  Not recommended for bonding polystyrene foam or unsupported PVC.

STORAGE PRECAUTIONS

Store in a cool, dry place, away from all sources of heat including direct sunlight.

 

  1. EXPOSURE CONTROLS AND PERSONAL PROTECTION

 

INGREDIENT NAME DICHLOROMETHANE
CAS No  75-09-2
STD  MEL
LT EXP (8 hrs) 100ppm
ST EXP (10 min) 300ppm

INGREDIENT NAME BUTANONE
CAS No  78-93-3
STD  OES
LT EXP (8 hrs) 200ppm(Sk) 
ST EXP (10 min) 300ppm(Sk)

INGREDIENT NAME LIQUEFIED PETROLEUM GAS
CAS No  68476-85-7
STD  OES 
LT EXP (8 hrs) 1000ppm 
ST EXP (10 min) 1250ppm

 

INGREDIENT COMMENTS

OES Occupational Exposure Standard

MEL Maximum Exposure Level

LT EXP Long Term Exposure Limit

ST EXP Short Term Exposure Limit

 

PROTECTIVE EQUIPMENT

GOGGLES

GLOVES

VENTILATION No specific ventilation requirements noted, except this product must not be used in a combined space without ventilation.

RESPIRATORS No specific recommendation made, but respiratory protection may still be required under exceptional circumstances

when excessive air contamination exists

 

PROTECTIVE GLOVES

Chemical resistant gloves required for prolonged or repeated contact.  The use of a suitable barrier cream is advised, but not as a substitute for gloves.

 

EYE PROTECTION

Safety goggles/glasses are advised if there is a risk of eye contact.

 

  1. PHYSICAL AND CHEMICAL PROPERTIES

 

APPEARANCE Aerosol

ODOUR/TASTE characteristic

SPECIFIC GRAVITY N/A @ 20oC

(Water = 1)           

pH-VALUE  N/A

FLASH POINT (oC) N/A

FLASH POINT METHOD Will not flash

 

 

  1. STABILITY AND REACTIVITY

 

 

MATERIALS TO AVOID Strong oxidising agents

CONDITIONS TO AVOID Avoid heat, flames and other sources of ignition.

HAZARDOUS DECOMPOSITION PRODUCTS Fire or high temperatures can create toxic gases/vapours/fumes of halogenated hydrocarbrons, oxides of carbon.

 

 

  1. TOXICOLOGICAL INFORMATION

 

HEALTH WARNINGS

 

EYE CONTACT May cause severe irritation, which may lead to permanent damage.

SKIN CONTACT Prolonged or repeated contact may cause irritation and/dermatitis.

INHALATION High concentrations of vapour may cause dizziness, nausea and headaches.

INGESTION May cause severe irritation to mouth, throat and intestinal system possibly leading to permanent damage.

 

  1. ECOLOGICAL INFORMATION

 

DEGRADABILITY No information available

ACUTE FISH TOXICITY No information available

WATER HAZARD CLASSIFICATION No information available

 

  1. DISPOSAL CONSIDERATIONS

 

DISPOSAL METHODS

Do not puncture or incinerate even when empty.  Dispose of in accordance with local authority requirements.

 

  1. TRANSPORT INFORMATION

 

ROAD

UN No  1950 ADR CLASS 2

CEFIC TEC(R) No 20G26-1 ADR ITEM No.:  5OF

 

AIR

UN AIR 1950 AIR TRANSPORT CLASS No. 2

AIR PACK GR                          -

 

SEA

UN SEA  1950 SEA TRANSPORT CLASS No 2

IMDG Page No 2102 SEA PACK GR.:

 

15.   REGULATORY INFORMATION

 

 

LABEL FOR SUPPLY EXTREMELY FLAMMABLE HARMFUL

 

INGREDIENTS TO BE DECLARED Dichloromethane

 

RISK PHRASES

R-12 Extremely flammable

R-40Possible risk of irreversible effects

 

SAFETY PHRASES

S-16 Keep away from sources of ignition – No Smoking

S-24 Avoid contact with skin

S-51 Use only in well ventilated areas

S-36/37 Wear suitable protective clothing and gloves

 

 

UK REGULATORY REFERENCES

 

The Control of Substances Hazardous to Health Regulations 1988

Chemicals (Hazard Information and Packaging) Regulations 1996

Aerosol Dispensers Regulations 1996/2421 (EC Directive 94/1)

 

 

 

 

  1. OTHER INFORMATION

 

SDS No.: 3769A

REVISION DATE 26/01/98

REVISION No 2

REVISION COMMENTS Revised formulation

 

 

 

                               

 

Disclaimer

This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process.  Such information is, to the best if the company’s knowledge and belief, accurate and reliable as of the date indicated.  However, no warranty, guarantee or representation is made as to its accuracy, reliability or completeness.  It is the user’s responsibility to satisfy himself as to the suitability if such information for his own particular use.


 

  © Care Products (Cannock) Ltd