home | product range | safety data | technical data | contact us  

Tuff Multi Surface Coating Health & Safety Data Sheet

Click here print this page

Section 1 Identification of the Substance/Preparation & Company
Product & Name Tuff Multi Surface Coating
Company Care Products & Services Limited Tel No. 01543 573374
61 Mill Street, Cannock Fax No. 01543 579435
Staffordshire. WS11 3DR Emergency. 01543 278105
Section 2 Composition/Information on Ingredients
Ingredients Range % Wt EEC-No Risk Phrases CAS No.
Isophorone Di-Isocyanate <3 615-008-00-5 T; R23 Xi; R36/37/38 Xn; R42/43 4098-71-9
Xylene, Mixture of Isomers 57 601-022-00-9 R10 Xn; R20/21 Xn; R38 1330-20-7
Section 3

Hazards Identification

Most important hazards Flammable. Toxic by inhalation. Contains Isocyanates.
Specific hazards Harmful in contact with skin. Irratating to skin. May cause sensitization by inhalation and skin contact.
Section 4 First-Aid Measures
Inhalation Remove the affected person to fresh air. If there is difficulty with breathing, give oxygen and obtain medical Attention urgently.
Skin Contact Wash contaminated skin immediately with plenty of water. Consult a physician if necessary.
Eye Contact Flush with water for at least 15 minutes and obtain medical attention if necessary.
Ingestion If the chemical enters the mouth rinse but never give anything by mouth to an unconcious person. Obtain medical attention urgently.
General Take off all contaminated clothing immediately
Section 5 Fire-Fighting Measures
Suitable extinguishing media Dry powder, sand and foam.
Extinguishing media which must not be used for safety reasons None. Water may be ineffective
Specific hazards Thermal decomposition can lead to release of irratating gases and vapours
Special protective equipment for firefighters In the event of fire, wear self contained breathing aparatus
Specific methods Standard procedure for chemical fires. Cool containers / tanks with water spray.
Section 6 Accidental Release Measures
Personal precautions Use personal protective equipment. Keep people away from and upwind of spill / leak.
Environmental precautions Do not let product enter drains. Avoid subsoil penetration.
Methods for cleaning up Soak up with inert absorbent material. Shovel into suitable container for disposal. After cleaning, flush away traces with water.
Section 7 Handling and Storage
Handling Use only in area provided with appropriate exhuast ventillation.
Storage Do not freeze. Store at room temperature in the original container. Keep tightly closed.
Section 8 Exposure Control/Personal Protection
Isophorone Di-Isocyanate MEL (as NCO) 0.02 mg/m3 (8 Hour ref. period)
  0.07 mg/m3 (15 min. ref. period)
Xylene, mixture of Isomers OES 100ppm (8 hour ref. peroid)
  150ppm (15min. ref. period)
can be absorbed through skin.
Engineering measures to reduce exposure
Ensure adequate ventillation, especially in confined ares.
Personal protection equipment.
Respiratory protection In case of insufficient ventillation wear respiratory equipment
Hand protection PVC or other plastic material gloves
Eye protection Face sheild
Skin and body protection Chemical resistant apron, protective suit, safety shoes / boots
Hygiene measures Handle in accordance with good industrial hygiene and safety practice
Section 9 Physical and Chemical Properties
Form Liquid
Colour Colourless
Odour of Xylene
Flash point 24 - 25 oC
Relative density (2oC) = 0.96
Solubility  
Water solubility Immiscible
Viscosity (25oC) 80 mPa.s
Section 10 Stability and Reactivity
Stability Stable
Conditions to avoid Do not freeze
Materials to avoid Strong oxidizing agents
Hazardous decomposition products None under normal use. Thermal decomposition can lead to release of irratating gases and vapours.
Section 11 Toxicological Information
No information available
Section 12 Ecological Information
No information available
Section 13 Disposal Consideration
Waste from residues / unused products Dispose of as special waste in compliance with local and national regulations
Contaminated packaging Empty containers. Empty containers should be taken for local recycling, recovery or waste disposal.
Section 14 Transport Information
  UN-No. 1992 Marine pollutant: No
ADR/RID
Class 3
TREM-CARD: 30G35
Item: 32oC
HI/UN No. 1992
  Proper shipping name: Flammable liquid, poisonous, n.o.s.
IMO
Class: 3.3
EmS: 3-07
IMDG Page:
MFAG:
  Proper shipping name: Flammable, poisonous, n.o.s.
ICAO
Class: 3
UN/ID No: 1992
  Proper shipping name: Flammable liquid, poisonous, n.o.s.
Section 15 Regulatory Information
Classification according to European directive on classification of hazardous preparations 90/492/EEC
Contains Isophorone di-isocyanate
Xylene, mixture of isomers
Symbol(s)

 


T - Toxic

Risk Phrases R10 Flammable
R21 Harmful in contact with skin
R23 Toxic by inhalation
R38 Irritating to skin
R42/43 May cause sensitization by inhalation and skin contact
Safety Phrases Contains isocyanates. See information supplied by the manufacturer.
S23 Do not breathe vapours or spray mist
S24 Aviod contact with skin
S36/37 Wear suitable protective clothing and gloves
S38 In case of insufficient ventillation, wear suitable respiratory equipment
S45 In case of accident or if you feel unwell, seek medical advice immediately (Show the label where possible).
Section 16 Other Information
Other Information The normal handling and safety precautions for the use of chemicals must be observed
No liability is accepted for any injury, loss, damage or cost arising directly or indirectly from the use of any information contained within this Material Health and Safety Sheet since the customer’s treatment of the product is necessarily out of control.
Click here print this page

 

  © Care Products (Cannock) Ltd